Copper Coated Micro Steel Fiber 0.2/13: Specifications, UHPC Applications, and Selection Guide

17, Nov. 2026

 

Copper Coated Micro Steel Fiber 0.2/13: Specifications, UHPC Applications, and Selection Guide

Copper coated micro steel fiber 0.2/13 is a fine steel reinforcement typically identified by a nominal diameter of 0.2 mm and a nominal length of 13 mm. Those dimensions give a nominal length-to-diameter ratio of 65:1, useful as a starting point when assessing fiber distribution and reinforcement needs in ultra-high-performance concrete (UHPC). The designation alone does not confirm steel grade, tensile properties, coating details, dimensional tolerances, or performance in a particular mix. At BEKA, we recommend checking the product data sheet and trialing the fiber in the intended mix before finalizing a project specification.

If you want to learn more, please visit our website.

Key Takeaways

  • The “0.2/13” designation generally refers to a nominal diameter of 0.2 mm and a nominal length of 13 mm; confirm the meaning and tolerances with the supplier.
  • The fiber may be considered for UHPC and other fine-grained cementitious mixes where a small fiber geometry is appropriate.
  • Fiber dosage, mix design, mixing sequence, workability, and placement method must be evaluated together rather than selected from dimensions alone.
  • Before ordering, request written information on dimensions, material properties, coating, packaging, quality controls, and commercial terms.

Who This Guide Is For

This guide is for concrete producers, precast manufacturers, engineering teams, distributors, and procurement professionals evaluating copper coated micro steel fiber for UHPC. It is intended to help buyers interpret the product designation, compare relevant specifications, and prepare useful questions for suppliers. It does not replace structural design, project specifications, or testing under the conditions of the intended application.

Buyers at the early sourcing stage can use the selection framework to prepare a request for quotation. Technical teams can use it to identify the information needed for laboratory trials and production approval. If your project already has a required fiber standard or performance target, provide it to the supplier rather than relying on a product name alone.

What Is Copper Coated Micro Steel Fiber 0.2/13?

It is a short, fine steel fiber with a copper-coated surface, offered for use as dispersed reinforcement in cement-based materials. The nominal dimensions associated with “0.2/13” are 0.2 mm in diameter and 13 mm in length, although buyers should confirm the supplier’s exact designation convention and allowable variation. The nominal aspect ratio, calculated as length divided by diameter, is 65.

In a cementitious matrix, discrete fibers can help control crack development and contribute to post-cracking behavior, depending on the fiber, dosage, matrix, orientation, and test method. They do not automatically replace conventional reinforcement or guarantee a particular structural capacity. The copper coating is a product attribute that should be described in the supplier’s documentation; its role and compatibility should be assessed for the specific mix and production process.

Specifications to Review Before Buying

The nominal dimensions are only the beginning of a procurement specification. For repeatable batching and a meaningful comparison between offers, request a technical data sheet with test methods and tolerances, where available. If an item is not stated, ask whether it is controlled, tested, or simply not specified.

Specification What to confirm Why it matters
Diameter and length Nominal values, measurement method, and tolerances Supports geometry comparison and mix-trial planning
Steel properties Steel grade and available tensile or mechanical data Allows designers to evaluate suitability against project requirements
Coating Coating description, consistency information, and handling guidance Helps assess material identification, storage, and mix compatibility
Product condition Fiber form, cleanliness, packaging, and visible clumping controls Relevant to storage, feeding, and dispersion during batching
Quality documentation Inspection records, batch identification, and applicable test reports Supports incoming checks and traceability requirements

Do not assume that two products with the same nominal dimensions have identical mechanical properties or coating characteristics. Compare documents on a like-for-like basis, including test methods and units. Where project acceptance depends on a specific property, make that requirement explicit in the inquiry and purchase specification.

UHPC Applications and Material Matching

Micro steel fibers may be considered in UHPC components where fine reinforcement is compatible with the matrix, geometry, production route, and design requirements. Potential project contexts include precast panels, thin sections, architectural components, and other elements for which the engineering team is evaluating fiber-reinforced cementitious material. These are application categories, not a guarantee that this particular fiber is suitable for every component.

Match the fiber to the mix and production method

UHPC mix designs can contain fine powders and aggregates, so fiber geometry and feeding method should be considered alongside the matrix’s flow and placement needs. A fiber that appears suitable on paper can still affect workability or dispersion in a particular formulation. Trial batches should therefore use the intended constituent materials, mixing equipment, addition sequence, and placement conditions as closely as practical.

BEKA are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

Separate design requirements from purchasing preferences

Engineers should define the required performance criteria and test methods before procurement. Purchasing teams can then compare suppliers on the same basis, including delivered product specifications and supporting records. If the design team has not established acceptance criteria, agree on a trial and evaluation plan before treating a quotation as technical approval.

Selection Framework for B2B Buyers

  1. Define the application. Document the component type, production process, placement method, and relevant design requirements.
  2. Confirm the product geometry. Verify what 0.2/13 means on the supplier’s data sheet and request dimensional tolerances.
  3. Review material and coating information. Ask for available steel-property data, coating description, storage guidance, and batch identification details.
  4. Plan a representative trial. Evaluate mixing, dispersion, workability, finishing, and the specified hardened performance using an agreed method.
  5. Check supply conditions. Confirm packaging, order quantity, production availability, shipping terms, and required delivery dates in writing.

Common selection mistakes

A common mistake is treating the fiber designation as a complete technical specification. Another is choosing dosage based only on a general recommendation without checking the matrix, equipment, and project performance criteria. Buyers should also avoid assuming that coating, appearance, or price alone proves equivalence between products.

To reduce risk, keep the approved sample, product description, trial records, and purchase specification aligned. Record any agreed change in dimensions, packaging, coating description, or source before production. This makes incoming inspection and supplier discussions more straightforward if a discrepancy arises.

Pricing, MOQ, and Lead Time

Pricing for copper coated micro steel fiber can depend on order volume, product specification, packaging, destination, and freight arrangements. Minimum order quantity and lead time are supplier- and order-specific, so they should be confirmed for the required grade and delivery location rather than inferred from a general product listing. For budget comparison, request a quotation that states the quoted specification, quantity basis, packing, validity period, and delivery terms.

For a new application, buyers may want to ask whether a sample or trial quantity is available and what documentation accompanies it. Confirm how production orders will be identified and whether the quoted lead time begins after specification approval, payment, or another agreed event. These details help procurement coordinate laboratory evaluation with production planning.

Supplier Evaluation Checklist

Evaluate a supplier on the clarity and consistency of the information provided, not only on the product name or quotation price. A reliable sourcing discussion should establish what is being offered, how it will be packed, and what records will accompany the shipment. Ask for written answers to project-specific requirements before approving the order.

  • Does the supplier confirm nominal dimensions and available tolerances?
  • Are steel properties and coating details documented to the level required for the project?
  • Can the supplier identify batches and provide relevant inspection or test records?
  • Are packaging, storage, sampling, and shipping details clear?
  • Are MOQ, lead time, quotation validity, and delivery terms stated in writing?

At BEKA, we support B2B buyers by discussing product requirements, reviewing the information needed for a quotation, and helping clarify specification questions before an order is placed. Availability of particular documentation, packaging, or order quantities should be confirmed for each inquiry. Sharing the intended application and target specification helps us respond more accurately.

Conclusion: How to Select 0.2/13 Micro Steel Fiber

Copper coated micro steel fiber 0.2/13 is generally identified by a nominal diameter of 0.2 mm and length of 13 mm, with a calculated aspect ratio of 65. It can be evaluated for UHPC when its geometry, material information, mixing behavior, and project performance requirements align, but the designation alone is not proof of suitability. The practical next step is to obtain the supplier’s technical data, define trial and acceptance criteria, and confirm commercial terms for the actual order.

To discuss a project or request a quotation from BEKA, send your target dimensions, application, estimated quantity, destination, and any required technical documents or performance criteria. We can then clarify the product information and supply conditions relevant to your inquiry before you proceed with testing or procurement.

Want more information on copper coated micro steel fiber 0.2/13? Feel free to contact us.