3G 50/50 LH Steel Fiber: Specifications, Applications, and Buyer’s Guide

17, Nov. 2026

 

3G 50/50 LH Steel Fiber: Specifications, Applications, and Buyer’s Guide

3G 50/50 LH steel fiber is a product designation that buyers should verify against the supplier’s technical data sheet and drawing before using it in a project. The name alone does not confirm the fiber’s dimensions, material grade, end geometry, or delivery form. This guide explains how to evaluate those details, match the fiber to an application, and request comparable quotations. At BEKA, we recommend confirming the project requirements and product definition before placing an order.

Click here to get more.

Key takeaways

  • Treat “3G 50/50 LH” as a designation, not a complete specification; ask the supplier to define every part of the name in writing.
  • Compare fibers using measurable properties such as length in millimeters, diameter in millimeters, tensile strength in megapascals, and material grade.
  • Check suitability through project-specific design review and, where appropriate, a concrete trial rather than relying on the product name alone.
  • Confirm packaging, minimum order quantity, production lead time, and inspection documents as part of the quotation.

Who this guide is for

This guide is intended for concrete producers, contractors, engineers, distributors, and procurement teams assessing 3G 50/50 LH steel fiber. It is useful when preparing a specification, comparing supplier offers, or checking whether a named fiber may fit a proposed concrete application. It does not replace structural design, local codes, or project-specific testing. Final product acceptance should follow the engineer’s requirements and the applicable project specification.

What does 3G 50/50 LH steel fiber mean?

Steel fibers are short steel elements distributed through a cementitious mixture to help control cracking and contribute to post-crack behavior. Their performance depends on several factors, including fiber geometry, material properties, dosage, concrete mix design, and placement. A product name can help identify a supplier’s range, but it is not enough to establish those factors. Buyers should obtain a technical data sheet and a dimensioned drawing for the exact item being quoted.

Confirm the product designation

The “50/50” part may resemble a length-to-diameter notation used in some fiber naming systems, but buyers should not assume that interpretation applies to this product. Likewise, “3G” and “LH” may be supplier-specific identifiers or refer to product features that need definition. Ask the supplier to state the fiber’s nominal length and diameter separately, with units, and to explain the meaning of each code. If the project calls for a particular end shape or supply form, request a drawing or written confirmation.

For example, if a supplier confirms a nominal length of 50 mm and diameter of 1.0 mm, the resulting length-to-diameter ratio is 50. This is an illustration of how to check a confirmed specification, not a claim that every product named 3G 50/50 LH has those dimensions. Use the supplier’s declared values and approved project documents when comparing offers. Do not calculate or infer critical properties from the product name alone.

Specifications buyers should compare

Ask for product data that allows an apples-to-apples comparison. A quotation that lists only a product code makes it difficult to evaluate technical fit, quality controls, or commercial differences. Request the information below for the specific batch or product version being offered. Where a value is not available, ask the supplier to identify it as unreported rather than assume it meets a requirement.

Specification What to confirm Why it matters
Geometry Length and diameter in mm; shape, end form, and tolerances Supports design review, handling assessment, and comparison between products
Material Steel grade or material description, coating if any, and relevant declarations Helps determine whether the product aligns with project and exposure requirements
Mechanical data Tensile strength in MPa and any other properties required by the specification Provides declared values for technical review; values should be tied to a test method where applicable
Packaging Net weight per bag or unit, packaging type, and pallet configuration Informs storage, handling, transport, and ordering calculations
Quality documents Inspection records, batch identification, and documents available for the order Helps maintain traceability and verify the supplied product against the purchase specification

Applications and product matching

Steel fibers may be considered for industrial floors, precast elements, shotcrete, or other concrete applications, depending on the design and project requirements. The same fiber should not automatically be treated as suitable for every one of these uses. Structural role, loading, exposure, placement method, concrete mix, and finishing requirements can all affect the selection. The engineer or responsible designer should confirm the required performance and whether fiber reinforcement is appropriate for the specific application.

Questions to ask before selecting a fiber

  • What function is the fiber expected to provide: crack control, post-crack contribution, or another defined role?
  • Does the project specification call for a particular geometry, material, performance value, or test method?
  • Can the mixing, pumping, spraying, placing, and finishing process accommodate the proposed fiber?
  • Are there appearance, corrosion exposure, or surface-finish requirements that affect the choice?
  • Will the supplier provide samples and product documents for review before a full order?

Where dosage is not specified, do not select it solely from a generic online recommendation. The required quantity depends on the design objective, mix, fiber characteristics, and placement conditions. A value such as 20 kg/m3 can be used only as an example in a preliminary trial discussion; it is not a universal design recommendation or a confirmed dosage for 3G 50/50 LH. Have the project’s technical team establish the trial plan and acceptance criteria.

Goto BEKA to know more.

A practical selection framework

1. Define the project requirement

Start with the project drawings, specification, and design intent. Identify whether the fiber is supplementary reinforcement or is being considered for a defined structural function. Record the required properties, acceptance criteria, applicable standards, and any restrictions on material or geometry. If these details are incomplete, resolve them with the project engineer before requesting a final quotation.

2. Match the product to the requirement

Send the supplier the project requirement and ask them to identify the exact product that meets it. Compare declared dimensions, material information, mechanical data, and test documentation rather than relying on a similar-looking code. Request clarification where a supplier’s terminology differs from the project specification. Keep a written record of approved deviations and substitutions.

3. Review handling and trial needs

Discuss how the fiber will be added, mixed, transported, and placed. Confirm packaging and feeding requirements with the concrete producer or contractor, and assess whether a trial is needed to review workability, dispersion, finish, or other project criteria. Agree in advance on who will conduct the trial and how results will be judged. A trial can inform suitability, but it does not replace structural design approval.

4. Compare the complete commercial offer

Request the quoted unit, net weight, packaging details, minimum order quantity, delivery basis, and estimated lead time. Ask whether the lead time begins after order confirmation, drawing approval, or another milestone. Include freight, handling, and required documents when comparing offers. A lower unit price may not represent the better procurement option if specifications, traceability, or delivery terms differ.

Supplier evaluation checklist

A qualified supplier should be able to explain the product designation clearly and provide consistent technical information for the quoted item. Ask how product identity is maintained through manufacturing, packing, and dispatch, and which inspection documents are available for your order. Check whether samples, customized packing, or export documentation can be discussed for your project. Confirm any service or customization request in writing before treating it as part of the supply commitment.

  • Does the supplier provide a technical data sheet and dimensioned drawing for the exact product?
  • Are units, tolerances, and test methods stated clearly?
  • Can the supplier identify packaging, MOQ, production lead time, and shipping options?
  • Are batch identification and the requested quality documents available?
  • Can technical questions and specification changes be confirmed in writing?

Common purchasing mistakes

One frequent mistake is interpreting “50/50 LH” without written confirmation, then comparing it with products that use the same numbers differently. Another is requesting a price before defining required geometry, material, packaging, and delivery terms, which can produce quotations that are not directly comparable. Buyers may also assume that a fiber suitable for one concrete application will perform identically in another mix or placement method. Avoid these risks by aligning the specification, trial plan, and commercial terms before issuing a purchase order.

Conclusion: how to buy 3G 50/50 LH steel fiber

3G 50/50 LH steel fiber may be appropriate for a project only after its designation and declared properties have been checked against the project’s technical requirements. Confirm dimensions in millimeters, material details, mechanical data in the stated units, packaging, and available quality documents. Then review application fit with the responsible engineer and arrange a project-specific trial if needed. For a BEKA inquiry, share the application, required specification, estimated quantity, destination, and target delivery schedule so we can discuss the appropriate product information and quotation.

Want more information on 3G 50/50 LH steel fiber? Feel free to contact us.