Tube cutting spans production over numerous industries from automotive to medical. Achieving quality production and speed with a tube laser cutting machine.
If you want to learn more, please visit our website.
The introduction of lasers to the manufacturing industry have made complex cuts easier. Make sure your manufacturer is utilizing an Automatic Load Tube Laser Cutting Machine–T-A Series.
Figure out if these variables are convincing enough to start production with a tube laser cutting machine.
Don’t sacrifice weight for strength. A T-A Series machine can make strong visually appealing products. Some features include allowing tube profiles to be bent to simply the assembly process.
By simplifying assembly or welding, tube laser cutting machines can reduce production costs by up to 30%.
Lasers allow operators to make cuts and edges in one smooth step without the need to continuously handling parts. Saws and drills require lots of material handling in contrast to lasers.
Reducing costs is a great incentive for any company.
Standard sizes for tubes range anywhere from 20 to 40 feet and sometimes longer. The capacity of a tube laser cutting machine will be measured by the maximum weight per foot.
Some manufacturers will order custom tubes to ensure there is the least amount of excess during production. Avoid scrap by having tubes designed specifically for the materials you are using.
Average sized tubes are generally 24 ft. long for 6-inch diameters or 30 ft. long for 10-inch diameters. The T-A Series can do bigger sizes.
The T-A Series tube laser cutter is able to load bundles of pipes on the feeding device to be sorted, loaded, and connected. You only want one pipe at a time being loaded for the delivery arm and pipe cutter.
You can switch tube sizes with an automatic switch controlled by an operator. This keeps you from having to constantly stop production for new tube sizes. There are some jobs that require manual stops to complete the task.
The unloading process is completely automatic to reduce processing and feeding times. It will automatically sort scrap to save you time and labor.
Most products are made by welded tubes during manufacturing. As opposed to seamless tubes, welded tubes can cause problems during production and possible assembly.
Most laser cutting machines have software to help detect exterior seams, but sometimes the software can miss interior seams due to the finish on the material.
The best machines will use a sensing system equipped with two cameras and light sources to look inside and outside the tube.
If a seam is detected by the software, the machine will rotate the tube to mitigate any potential problems.
Most shapes and designs can be cut with tube laser machines, but any irregular profiles might be difficult to load properly. An additional camera and light can detect if a tube will need the chuck to be adjusted.
You shouldn’t have to worry if your production will be hindered by asymmetrical profiles.
The Automatic Load Tube Laser Cutting Machine–T-A Series is an intelligent piece of heavy machinery. Check out some of these smart features:
New Hope Laser contains other products and information you need, so please check it out.
Other intelligent functions include a low-pressure alarm for auxiliary gas. Real-time stats give the warning for replacement.
Some of the safety features have revolutionized the manufacturing industry. Collisions are greatly reduced by having the laser head spaced from the material. The machine will stop cutting if a collision with the plate happens.
The T-A Series also has intelligent travel protection. It will monitor the operation range of the crossbeam and parts. Operators will be safe with extra protection.
Using the laser is high precision and ensures quality cuts. Other methods like punching or wire cutting may have low production speed or unable to make some cuts or perforations.
Since cost is important, mechanical cutting is more expensive to buy and run.
More intricate punch die sets can cost even more. Lasers provide flexibility and ease at a cheaper cost to the manufacturer and client.
Operators with backgrounds in plasma or mechanical cutting should have no problem translating their skills to the T-A Series cutter.
Since , fiber lasers have steadily grown in production and acquisition. Traditional CO2 lasers are still a popular choice, but technology has allowed the fiber lasers to catch up in its ability to cut thick materials.
The gas laser struggles to cut through certain metals like brass and copper. Fiber lasers can easily cut through these metals and other reflective materials.
Some cuts and materials still require a CO2 laser, and operators may only be trained to work with the traditional machine.
Optical fibers allow the working position in fiber lasers to be flexible and light-weight. The need for maintenance is reduced and the efficiency is higher.
More savings take place because fiber lasers do not require expensive reflection lenses. Fiber laser cuts quicker and more consistently.
A place for CO2 lasers currently exists in the industry. Technological advancements allow the fiber laser to quickly close the gap. Consider the strengths and weaknesses of each with respect to the job you need.
It’s no secret a tube laser cutting machine holds features that make production and assembly easier and more affordable.
Would your products and process benefit from using a manufacturer that employed the Automatic Load Tube Laser Cutting Machine–T-A Series?
If you answered “yes”, contact us today so we can get your business on the right track.
Laser cutting machines have become increasingly popular in recent years due to their precision and efficiency. When it comes to cutting tubes and plates, there are two main options: a laser cutting machine that can handle both tubes and plates, or a laser cutting machine specifically designed for tubes. In this article, we will explore the pros and cons of each option and help you decide which one is the best fit for your needs.
Fiber Laser Cutting Machine for Tubes and Plates
The laser cutting machine for both tubes and plates is a more versatile option, making it suitable for a wider range of industries. In addition, it also helps to save floor space and reduce equipment investment costs. It is equipped with a flatbed table that can hold both tubes and plates, allowing for greater flexibility in the types of materials that can be cut. The advantage of this type of machine is that it can handle a wider range of materials and shapes, making it a more versatile option for businesses that need to cut both tubes and plates.
However, it is important to note that the rotary chuck used for cutting pipes on this machine may not be as precise as the one used in the fiber laser tube cutting machine. That is to say, it is more suitable for those manufacturers whose main business is plate cutting, but only occasionally have the need for pipe cutting. Because in this case, it is not cost-effective to buy a metal sheet fiber laser cutter and a tube laser cutter at the same time.
Fiber Laser Cutting Machine for Tubes
A fiber laser tube cutting machine is specifically designed to cut pipes of various shapes and sizes. The structure of the laser tube cutting machine is relatively simple, mainly composed of the machine body, laser source, optical path system, cutting head, control system and so on. The laser cutting machine for tubes is equipped with a rotary chuck that can hold the pipe in place while it is being cut. This ensures that the tube remains stable and does not move during the cutting process, resulting in quick but precise cuts of stretching tubes such as square tube, round tube, runway shape tube and oval tube, as well as special-shaped steels, such as angle steel, channel steel, and I-shaped steel. It is ideal for industries such as construction, oil and gas, and plumbing.
However, it is limited in its capabilities and cannot cut plates or other materials. One of the main factors to consider when choosing a fiber laser tube cutting machine is the price. These machines can range from a few thousand dollars to tens of thousands of dollars, depending on the size and complexity of the machine.