R180 Single Cylinder Diesel Engine Specifications and Buying Guide

17, Nov. 2026

 

R180 Single Cylinder Diesel Engine Specifications and Buying Guide

An R180 single cylinder diesel engine is commonly used as a compact power unit for agricultural machinery and other equipment, but the “R180” designation alone does not confirm an exact specification. Some market listings describe an R180 configuration as approximately 8 hp (5.9 kW), 2,200 rpm, with an 80 mm bore and 80 mm stroke; these figures are reference points, not specifications that apply to every supplier or version. Before ordering, match the engine to your machine’s required power, operating speed, mounting arrangement, cooling system, and shaft or transmission connection. At YUANGEN, we recommend confirming the complete configuration in writing before comparing quotations.

Click here to get more.

Who This Guide Is For

This guide is for agricultural machinery manufacturers, equipment distributors, repair businesses, and importers sourcing an R180 engine or a compatible replacement. It is particularly useful if you have received quotations with different ratings or need to check whether an engine will fit existing equipment. Use it to prepare the technical information a supplier needs to give you a comparable offer. If the engine is replacing an existing unit, the original nameplate and physical measurements are important starting points.

Understanding the R180 Engine

R180 is a model designation used in the single-cylinder diesel engine market, but buyers should not assume that every product carrying this label has identical dimensions or performance. Engines may differ by manufacturer, production version, rated speed, cooling arrangement, starting method, and output configuration. “Single cylinder” describes the basic cylinder arrangement; it does not, by itself, confirm a particular power rating or machine compatibility. For procurement, the full technical data sheet and interface details matter more than the model code alone.

Common Specification Reference Points

Some listings associate R180 engines with approximately 8 hp (5.9 kW), 2,200 rpm, and an 80 mm bore by 80 mm stroke. Treat these as indicative market references only, because specifications can vary and listing details may not describe the version being offered. Ask the supplier to identify the rated output and the conditions under which it is specified. Request a drawing or written confirmation if the engine will connect to an existing machine.

Specification to Confirm Why It Matters What to Request from the Supplier
Rated power and rated speed Determines whether the engine can meet the equipment’s load and operating-speed requirements. Power rating, unit, rated rpm, and applicable rating conditions.
Cooling arrangement Affects installation, maintenance, and compatibility with the machine’s cooling setup. Confirmation of water-cooled or other configuration, plus any required cooling components.
Mounting and output interface Incorrect dimensions or connection details can prevent installation. Mounting-hole drawing, shaft or coupling details, and rotation direction where relevant.
Starting and accessories Equipment design may require a specific starting method or included component set. Starting method and a list of included and optional accessories.

Types, Cooling, and Configuration Options

For an R180 purchase, configuration should be treated as a specification choice rather than assumed from the model name. Confirm whether the offered engine is water-cooled and clarify which cooling components are included. Also check the starting method, output shaft or coupling, mounting arrangement, and any accessories required by your machinery. The supplier’s quotation should distinguish standard inclusions from optional parts so that you can compare like for like.

Water-Cooled Versions

A water-cooled engine must be matched to the equipment’s cooling layout and installation space. Confirm the cooling connections and required components with the supplier, especially when replacing an engine that was already installed in a machine. Do not assume that a water-cooled description means every hose, radiator, or related component is part of the quoted package. Ask for the scope of supply and maintenance requirements before placing an order.

YUANGEN are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

Match the Engine to the Application

R180 engines may be considered for agricultural machinery and other equipment that accepts a compatible single-cylinder diesel power unit. The correct choice depends on the machine’s actual load, duty pattern, required speed, and physical interfaces. For example, a unit that fits the mounting points may still be unsuitable if its rated speed or output connection differs from the machine requirement. Share the equipment model, existing engine information, and intended operating conditions with the supplier.

Questions to Answer Before Requesting a Quote

  • What power and rated speed does the machine require?
  • Is the replacement required to match a water-cooled setup?
  • What are the mounting dimensions and output connection details?
  • Which starting method and accessories does the installation require?
  • Is this a replacement order, a new equipment project, or stock for resale?

Selection Framework for Buyers

  1. Record the existing specification. Photograph the engine nameplate and note the model, rated output, speed, and any visible configuration details.
  2. Measure the interfaces. Document mounting points, shaft or coupling dimensions, and available installation space. Use a drawing where possible to reduce interpretation errors.
  3. Define operating requirements. Tell the supplier what the engine drives, how it is used, and any known load or speed requirements. Do not select based on a horsepower figure alone.
  4. Compare complete quotations. Check that each offer states the engine configuration, included accessories, packaging, quantity, delivery terms, and any applicable warranty terms.
  5. Approve the specification before production or dispatch. Confirm the final model and configuration in writing, particularly for replacement orders or mixed shipments.

Price, MOQ, and Lead Time

R180 engine pricing depends on the confirmed configuration, order quantity, included components, packaging, and delivery arrangement. Minimum order quantity and lead time are supplier- and order-specific, so they should be requested rather than assumed from a model listing. When asking for a quotation, state your destination, quantity, preferred configuration, and whether you need spare parts or export packaging. This helps suppliers respond with a more relevant offer and reduces the risk of comparing prices with different scopes.

For repeat purchasing, ask whether the supplier can identify the agreed configuration on order documents and maintain consistent specification records. If you are evaluating a first order, request available product documentation and clarify what inspection or pre-shipment information can be provided. Do not treat an estimated delivery date or verbal specification as final until the commercial and technical details are confirmed. Keep the approved drawing or data sheet with your purchase order.

Supplier Evaluation Checklist

  • Can the supplier provide a written specification for the exact R180 configuration being quoted?
  • Are rated power, speed, cooling arrangement, and interface details clearly stated?
  • Can the supplier confirm which accessories are included and which are optional?
  • Are MOQ, lead time, packaging, payment terms, and shipping scope clearly explained?
  • Is there a practical process for resolving specification questions before shipment?

As a supplier, we recommend that buyers send their required specification rather than relying only on a model name. At YUANGEN, we can review your application details and discuss the engine configuration, order quantity, and documentation needed for your sourcing process. Availability and configuration should be confirmed for each inquiry. This approach helps both sides establish a clear basis for quotation and order review.

Common Buying Mistakes to Avoid

  • Assuming every R180 is identical: Model labels can be insufficient to establish a complete specification.
  • Comparing horsepower without rated speed: Power and operating speed should be reviewed together against the machine requirement.
  • Overlooking the interfaces: Mounting, shaft, and cooling details can determine whether installation is practical.
  • Leaving accessories unclear: Ask for an itemized scope so you know what arrives with the engine.
  • Ordering before technical approval: Confirm the configuration in writing, especially for replacements and bulk orders.

Key Takeaways

  • R180 is a useful starting model reference, but it does not guarantee identical specifications across suppliers.
  • Market listings may cite approximately 8 hp (5.9 kW), 2,200 rpm, and an 80 mm × 80 mm bore and stroke; verify every figure for the offered version.
  • Match output, speed, cooling, mounting, and output connection to the machinery before ordering.
  • Request a written specification, clear accessory scope, and order-specific MOQ and lead-time information.

Conclusion: How to Buy the Right R180 Engine

The right R180 single cylinder diesel engine is the one that meets your machine’s documented power, speed, cooling, and connection requirements—not simply one carrying the R180 label. Start by collecting the nameplate details and interface measurements, then ask suppliers to quote against the same written specification. Before confirming an order, review the included components, delivery terms, and final technical documents. Send your application, required quantity, and available engine details to YUANGEN to discuss a suitable configuration and request a quotation.

The company is the world’s best R180 Single Cylinder Diesel Engine supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.