5/8 Inch SS201 Welded Wire Mesh Specifications and Buying Guide
5/8 inch SS201 welded wire mesh is a stainless steel grid made by welding wires at their intersections, with a nominal opening of 5/8 inch, or 15.875 mm. The opening size alone does not define the finished product: buyers also need to specify wire diameter, panel or roll dimensions, edge finish, and quantity. At Shunqiang Wire Mesh, we recommend confirming these details against the intended application before requesting a quotation. This guide explains the main specifications, material considerations, sourcing factors, and questions to ask a supplier.
Please visit our website for more information on this topic.
Key Takeaways
- A 5/8 inch opening converts to 15.875 mm; confirm whether the stated measurement means clear opening or center-to-center spacing.
- SS201 is a stainless steel grade, but its suitability depends on the environment and maintenance requirements. Do not assume it will perform like every other stainless steel grade.
- Wire diameter, mesh dimensions, finish, and packaging are essential quote details, not minor add-ons.
- Ask the supplier to confirm available production specifications, minimum order quantity, lead time, and inspection documentation for your order.
Who This Guide Is For
This guide is for importers, distributors, fabricators, and project buyers sourcing 5/8 inch SS201 welded wire mesh. It is useful if you are comparing quotations, preparing a purchasing specification, or checking whether a particular mesh configuration fits your application. Since requirements vary by project and supplier, treat the information below as a selection framework rather than a guarantee that every specification is a standard stock item. Confirm the final details in a supplier quotation and approved order documents.
What Is 5/8 Inch SS201 Welded Wire Mesh?
Mesh opening and construction
Welded wire mesh consists of intersecting wires joined at their crossing points to form a grid. In this product description, “5/8 inch” identifies the nominal opening dimension, while “SS201” identifies the stated stainless steel material grade. The opening measurement may refer to the clear space between wires or to the distance from the center of one wire to the center of the next, so buyers should state which measurement they require. The two definitions produce different finished layouts.
What SS201 means for purchasing
SS201 is a chromium-manganese-nickel stainless steel grade commonly selected for applications where a stainless steel surface is desired and the service environment is appropriate for the grade. Its performance depends on exposure conditions, fabrication, surface condition, cleaning practices, and other project factors. Do not select it solely because a product is described as “stainless”; assess the actual environment, especially where moisture, salts, chemicals, or frequent cleaning are present. If corrosion resistance is a critical design requirement, ask your technical team to confirm the appropriate material grade.
Specifications to Confirm Before Ordering
A complete mesh specification should describe more than the aperture. Use the table as a checklist when preparing an inquiry, and ask the supplier to confirm whether each requested item can be produced for your order. Values such as wire diameter and roll width are project requirements, not implied defaults for every 5/8 inch SS201 mesh. Keeping the specification consistent helps buyers compare quotations on the same basis.
| Specification | What to state or confirm |
|---|---|
| Material | SS201, with any required material identification or documentation stated in the purchase specification. |
| Opening | 5/8 inch (15.875 mm) nominal; clarify clear opening versus center-to-center measurement. |
| Wire diameter | Specify the required diameter and confirm the supplier’s achievable production tolerance. |
| Format and dimensions | State roll or panel format, width, length, and any required cut sizes. |
| Finish and edges | Describe the required surface condition, edge treatment, and any post-weld finishing needs. |
| Packaging and quantity | Provide order quantity, packing preferences, destination, and any handling requirements. |
Match the Mesh to Its Application
A 5/8 inch grid may be considered for general screening, guards, partitions, or fabricated components, provided the opening, wire diameter, and overall construction meet the project’s requirements. The mesh should not be treated as a substitute for an engineered safety barrier or load-bearing component unless its design has been assessed for that use. The suitability of SS201 also depends on the operating environment and the expected service conditions. Share the intended use with your supplier so they can identify specification questions before production.
Goto Shunqiang Wire Mesh to know more.
Think beyond the opening size
Two products with the same nominal opening can behave differently if their wire diameters, weld quality, panel dimensions, or edge finishes differ. A thicker wire may change the open area and finished weight, while a change in opening measurement convention can affect the grid layout. For this reason, request a drawing or written dimensional confirmation when the mesh must fit a frame or assembly. Where dimensional fit is critical, agree on inspection points before placing the order.
A Practical Buyer Selection Framework
- Define the job: Describe what the mesh will screen, guard, enclose, or support, and identify any relevant exposure conditions.
- Write the dimensional requirement: State the 5/8 inch opening and define how it is measured. Add wire diameter and finished product dimensions.
- Choose the supply format: Specify roll or panel form, cut sizes, edge requirements, and packaging expectations.
- Check material suitability: Confirm that SS201 fits the environment and any applicable project specifications. Escalate corrosion or compliance questions to the responsible technical team.
- Compare quotations consistently: Check that each supplier is quoting the same material, opening definition, wire diameter, dimensions, finish, quantity, and delivery destination.
- Approve the order details: Review the final specification, commercial terms, production schedule, and agreed inspection or documentation requirements before confirming.
Pricing, MOQ, and Lead Time
The price of 5/8 inch SS201 welded wire mesh depends on the material specification, wire diameter, mesh dimensions, order quantity, processing, packaging, and delivery destination. Minimum order quantity and lead time can also vary with product format, production scheduling, and whether the requested dimensions require special processing. We do not recommend relying on a generic price or delivery estimate without a confirmed specification. Request a project-specific quotation that lists the assumptions behind the offer.
Details to include in a quotation request
- Required material grade and any documentation expectations.
- Opening size, measurement definition, and wire diameter.
- Roll or panel format, dimensions, quantity, and permitted tolerances.
- Finish, edge treatment, packaging, delivery destination, and requested schedule.
Supplier Evaluation Checklist
Before selecting a supplier, check whether its team can review the full specification rather than quoting only from the opening size. Ask how the supplier confirms material designation, dimensions, and agreed inspection requirements for the order. Clarify which documents are available and whether they are included, optional, or dependent on the production arrangement. Also confirm how changes to dimensions or quantity may affect price and schedule.
At Shunqiang Wire Mesh, we work with buyers to review mesh requirements and prepare quotations based on the requested material, opening, wire diameter, dimensions, and order details. Product availability, customization options, documentation, MOQ, and lead time should be confirmed for each inquiry. We encourage buyers to provide drawings or a complete written specification when the mesh must fit an assembly or meet project-specific acceptance criteria. This helps us assess the request accurately before commercial terms are finalized.
Common Buying Mistakes to Avoid
- Specifying only “5/8 inch”: This can leave the opening measurement convention and wire diameter unclear.
- Assuming SS201 suits every environment: Confirm grade suitability against exposure and project requirements.
- Comparing incomplete quotations: Check that dimensions, finish, packing, quantity, and delivery terms match.
- Leaving tolerances unstated: Agree on acceptable dimensional variation where fit or assembly depends on it.
- Waiting until after production to request documents: Identify documentation needs during the quotation stage.
Conclusion: How to Buy the Right 5/8 Inch SS201 Mesh
To source 5/8 inch SS201 welded wire mesh, specify the nominal 15.875 mm opening, clarify how it is measured, and provide the wire diameter, product dimensions, format, finish, quantity, and delivery details. Then verify that SS201 is suitable for the intended environment and agree on inspection and documentation requirements before ordering. These steps make supplier quotations easier to compare and reduce avoidable specification gaps. Send your complete requirements or drawing to Shunqiang Wire Mesh to request a project-specific review and quotation.