If you’re thinking about buying a metal building, here is what you should know first.
Please visit our website for more information on this topic.
Yes, metal building prices are lower than wood. The exact price difference depends on the current cost of steel versus lumber. You can generally expect the shell of a wood building to cost about twice as much as a metal building.
Metal buildings are cheaper than buildings made out of wood or other materials. But that doesn’t mean they are of poor quality.
We did our own study to find out if repo storage buildings were cheaper than new storage buildings. We found that the average discount on a used building was only 12%, and that the used buildings we found were on average 42% more expensive than the new buildings we sell.
Metal buildings are usually a good investment because of their low cost to build, their long lifespan, and their low cost of maintenance. Adding a metal garage or shop to your home will usually increase the value of your property more than the amount you pay for the building.
Prefab metal buildings cost anywhere between $8 and $30 per square foot. This includes the price of delivery and installation, but not the cost of permits, site preparation, and a concrete foundation. The total cost will usually fall between $14 to $45 per square foot.
A concrete foundation will usually cost at least $8 per square foot. In some areas the price will be lower, but usually it will be higher. The biggest factor is the local cost of labor. If you pour your own foundation, you only need to pay for the cost of the concrete and any tools and supplies that you need.
Some manufacturers offer financing for metal buildings. Some lenders like New Century Bank and Acorn Finance specialize in financing metal buildings. A metal garage can be financed with a second mortgage, a cash-out refinance, or a home equity line of credit.
Steel and aluminum are both used for prefabricated metal buildings. Aluminum is softer and is more likely to scratch and dent. Steel is stronger and more durable, so it is more commonly used to construct metal buildings.
Steel is stronger and more durable than aluminum, so it is a better material than aluminum for metal buildings. Large metal buildings are often made out of red iron I-beams. Red iron is actually steel that is coated with iron oxide. Smaller buildings are typically made with galvanized steel framing and panels.
Pre-engineered metal buildings are buildings that are designed and manufactured in a factory, and then transported and installed at the building site. Pre-engineered metal buildings are more cost effective than buildings constructed on-site because there is almost no material or labor wasted in the construction process.
Alan’s Factory Outlet sells metal buildings and metal garages in Alabama, Arkansas, Florida, Georgia, Illinois, Indiana, Kansas, Kentucky, Louisiana, Maryland, Mississippi, Missouri, North Carolina, Ohio, Oklahoma, Pennsylvania, South Carolina, Tennessee, Texas, Virginia and West Virginia.
Most steel building will last at least 50 years, with minimal maintenance. With regular annual inspection and care, metal buildings can last more than 100 years. Metal builds can withstand many extreme weather conditions without incurring any damage.
Those who want the highest quality metal building should select the following features:
Metal buildings can be designed and built to withstand hurricane-force winds. The strongest hurricanes are class 5 hurricanes, with sustained winds that are at least 157 mph. You can get a metal building with a certification for winds up to 170 mph, which can survive most hurricanes.
About 1% of tornadoes are violent EF4 or EF5 tornadoes, with wind speeds above 207 mph, sometimes reaching speeds above 300 mph. Very few buildings will survive a direct hit from these violent storms. Metal buildings can be certified for 170 mph winds. These buildings are safe in most tornadoes.
Metal buildings can be grounded with metal rods driven into the ground that are bonded to the metal frame of the building. If lightning strikes the building, the electricity simply passes through the metal framing and into the ground.
A properly grounded metal building is safe during a lighting storm, provided no one is touching the metal frame, metal siding, or any conductive material that is attached to the metal shell of the building. Like any building, nearby lightning strikes may disrupt electrical systems that are not equipped with surge protectors.
Jiuyuan contains other products and information you need, so please check it out.
Note: Buildings sold by Alan’s Factory Outlet are not designed or intended to be used as homes.
Metal buildings can be safe to live in. However, they should be designed and built as a home and properly insulated. Metal buildings that are designed as garages are not air-tight, and are not designed for use as a home.
Laws vary widely between locations. The fastest way to find the laws in your area is to call the zoning planning department for the city or county that you live in.
Yes. A metal building may be used as a house if it is constructed to local codes for residential structures. Barndominiums are metal homes that have been gaining in popularity in recent years.
Metal buildings can be disassembled and moved more easily than most other types of buildings. However, moving a metal building is still a complex operation. Obviously, the foundation of the building cannot be moved. A new foundation will need to be poured before moving the metal building.
The metal buildings we sell have the colors baked on. These colors last a long time and do not easily fade. If you want to paint your metal building a different color, you can use a metal specific paint, or paint the building with a metal primer before using an exterior paint.
Yes. There are several ways to insulate a metal building:
At Alan’s Factory Outlet we offer double bubble and woven R-17 insulation.
Insulation is optional, but offers several benefits:
Metal buildings are insulated by attaching insulation to the inner walls and ceiling of the building.
Check out our Metal Garage Buyer’s Guide if you’re shopping for a metal garage.
If you are in search of a steel structure for your business, you likely have a variety of possibilities. Obtaining something is unquestionably a difficult procedure. But if you know what you’re doing and have the necessary skills, it’s quite simple—even simpler than purchasing a computer! EPACK Prefab is here to answer your questions and assist you in selecting the ideal product for your needs. To ease the process of obtaining smoother, we have compiled a list of frequently asked questions from our clients. It boils down to pricing, standards, products, facility, appearance, and building construction.
Prefabricated structures may be erected rapidly, and our company is one of the most prominent in India. We have constructed warehouses and airport terminals in as little as three to four months. However, the duration of construction depends on the size of the project. The average size of a warehouse is 70,000 square feet, and if there are no problems on the job site, it may be completed in three months.
This is one of the most frequently asked questions we receive. When it comes to delivery and deadlines, the customer’s flexibility saves a substantial amount of cash. However, inexpensive does not necessarily equate to better. It is hardly a secret that some suppliers sacrifice quality to reduce production costs. Putting design and engineering at risk may first seem like a smart concept, but it might result in buildings that are not very good. This will inevitably increase maintenance and repair expenditures over time.
Steel may be used to construct a variety of building types and comes in a variety of sizes and shapes. Our frames are built entirely of cold-rolled steel.
The primary structure of the buildings consists of building columns, rafters, crane brackets, and end wall surface structures. The primary frames are comprised of steel H-beam frameworks. Following the primary construction is another frame that supports the roof wall sheets. The auxiliary structure is crucial for the movement of lots and for assisting the primary frame. Some of the components include purlins, girts, eave struts, bracing, etc.
Yes, we have the capacity to supply projects in their entirety, from planning and design through onsite delivery and execution. We have been expert teams, each with a unique skill set, meeting all of the requirements for executing jobs. Additionally, we have a distribution network that operates throughout India, and our organisation is renowned for completing jobs in the most remote regions of the country.
Contact us to discuss your requirements of Prefab Steel Structure. Our experienced sales team can help you identify the options that best suit your needs.