Cable cleat selection takes into account numerous factors listed below, and ideally if CMP Products can be supplied with the following: cable construction – type, ratings and diameter, system design, support structure and environment; it will then be possible to provide further advice on the correct type of cable cleat, and also the cable cleat spacing requirements for a specific application.
If you are looking for more details, kindly visit Langnuo Mining Equipment.
Cable – What type of cable is being used?
Diameter
The overall diameter of the cable will allow CMP Products to size the correct cable cleat and calculate the short circuit forces the cable cleat may be subjected to under fault conditions.
Performance
The cable may have fire performance (FR), or Low Smoke & Fume or Zero Halogen (LSF / LS0H / LSZH) requirements that the cable cleat would also have to adhere to.
Cable Type
Consideration should be given to whether the cable is single or multi-core and whether the voltage is Low (LV), Medium (MV) or High (HV).
Design – Overview of the cable management system
Mechanical Load
All CMP cable cleats have been tested for both axial and lateral loads, this will ensure they will be capable of supporting the weight of the cables(s).
Short Circuit Rating – kA Peak Fault or r.m.s
What is the maximum peak fault (kA) the cable may be subjected to under short circuit conditions? Based upon
the specified cable the short circuit rating can be calculated with use of the standard IEC to give the maximum forces the cable cleat will need to be able to withstand during a short circuit fault.
Cable Configuration – Form Form / Parallel or Trefoil Formation?
The cable configuration of the system will define the type of cable cleat required; either a single cable cleat, a trefoil cable cleat, a quad cable cleat, or this may even indicate that a bespoke cable cleat may be required which CMP Products will design, test, and certify to suit the cable management system requirements of its client.
Cable Run Length – How many cable cleats are required?
Whilst the spacing requirements for cable cleats will be subject to cable formation, cable diameter, and short circuit rating, the overall cable run length will give the correct number of cable cleats required for the installation. Cable runs that turn through 90° must also be noted as the cable cleat spacing will be reduced throughout these bends. See cable cleat installation page for more information on installing cleats through bends.
Expansion
Single core cables expand and contract more due to temperature changes than multicore cables. If the cable is constrained, considerable forces can be transferred to the supporting structure. To allow for this, single core cables are generally “snaked” making slight loops to take up the expansion and contraction. It is also usual to allow some of the cable cleats to move freely and not restrain all cable cleats.
Are you tired of sifting through countless cable cleat options? Understanding the top manufacturers can save you time and money. By knowing the best factories, you ensure quality and reliability for your projects. Dive in to discover the leading names in the industry and make informed choices today!
Product Details: Panduit Cable Cleats are designed to secure cables during short circuit faults, minimizing disruption and damage. They are available in various materials including stainless steel, aluminum, and polymer.
Technical Parameters:
– Material: 316L stainless steel, aluminum, polymer
– Compliance: Tested to IEC standards
Application Scenarios:
– Industrial environments with high short circuit risks
– Construction sites requiring reliable cable management
Pros:
– Engineered for durability and reliability in harsh conditions
– User-friendly design that simplifies installation
Cons:
– Limited stock for some models
– Potentially higher initial cost compared to traditional cable ties
Product Details: Cable cleats for industrial applications designed for safety-critical environments.
Technical Parameters:
– Adheres to IEC standards
– Certified to ISO , , & BS EN
Application Scenarios:
– Wind farms
– Nuclear power plants
Pros:
– Proven reliability in critical operations
– Decades of innovation and rigorous testing
Cons:
– Limited information on specific product variations
– Potentially higher cost due to quality and certification
Product Details: Cable Cleats for Electrical Installations by CMP Products, designed for industrial and hazardous locations.
Technical Parameters:
– Tested in accordance with IEC
– Suitable for various cable formations
Application Scenarios:
– Rail
– Underground
– Oil and Gas
– Mining
– Petrochemical
Pros:
– Comprehensive range for different applications
– Enhances safety in electrical installations
Cons:
– Specific product details not provided
– Limited information on installation requirements
Product Details: TALON® cable cleats provide support, restraint, strain relief, and protect cable management systems during a short-circuit by containing the cables without damage. They can accommodate cables with outer diameters ranging from 0.51″ to 4.25″.
Technical Parameters:
– Simple and fast 3-step installation with patented Hug the Rung® technology
– 10+ years service life and industry leading UV protection
Application Scenarios:
– Cable management systems in industrial settings
– Vertical cable installations
Pros:
– Tested to be reusable after a short circuit when installed at specified interval…
– Fits virtually every major cable tray and can be easily retrofitted to existing…
Cons:
– Requires specific installation intervals for reuse after a short circuit
– May not be suitable for all cable types
Are you interested in learning more about Mining Cable Cleats? Contact us today to secure an expert consultation!
Product Details: Cable cleats are essential components used to secure and manage cables in electrical installations, ensuring they remain firmly in place and are protected from mechanical stress, vibrations, and short circuits. Types include Aluminum Claw Cable Cleats, Aluminium Two Bolt Cable Cleats, Aluminium Trefoil Cable Cleats, PVC Single Bolt Cable Cleats, Nylon Two Bolt Cable Cleats, and Nylon Trefoil Cable Cleats.
Technical Parameters:
– Aluminum Claw Cable Cleats provide robust support with a strong grip, ideal for…
– Polymer insulator metal fitting parts are designed to securely attach polymer in…
Application Scenarios:
– Used in industrial setups for securing high-voltage systems.
– Applicable in renewable energy projects such as solar and wind farms.
Pros:
– Durable and reliable under mechanical and electrical stress.
– Innovative design that meets safety standards.
Cons:
– Limited information on specific product dimensions.
– Potentially higher cost compared to standard cable management solutions.
Product Details: Industrial-grade cable cleats designed for safe electrical installations, including heavy-duty, fire-resistant, and UV-resistant options.
Technical Parameters:
– Manufactured with industrial-grade materials
– Available with M10 or M12 accessories
Application Scenarios:
– Cable trays
– Power distribution networks
Pros:
– Durable and built to withstand harsh conditions
– UV and fire-resistant options available
Cons:
– Specific technical parameters not detailed
– Limited information on installation requirements
Product Details: Panduit Cable Cleats for short circuit protection, designed to secure cables during short circuit faults.
Technical Parameters:
– Tested to IEC standard
– Available in various sizes and materials including stainless steel, aluminum, an…
Application Scenarios:
– Oil and Gas
– Data Centers
Pros:
– Increases installation efficiency and reduces project costs
– Compatible with various ladder racks and cables
Cons:
– Limited to specific environments based on material choice
– Installation may require specialized tools
Product Details: Cable Cleats designed for short circuit protection in electrical installations.
Technical Parameters:
– IEC : compliance
– Resistance to electromechanical forces
Application Scenarios:
– Industrial electrical systems
– Construction projects requiring cable management
Pros:
– Exceeds current US electrical code safety requirements
– Engineered for easy installation and reduced material use
Cons:
– Limited guidance in NEC standards for cable cleat design
– Potentially higher initial costs compared to standard solutions
Product Details: Aluminium cable cleats manufactured by Knapp Engineering, including Two Bolt, Orion Type, Claw Type, and Trefoil Type Cable Cleats.
Technical Parameters:
– Suitable for various cable diameters ranging from 10mm to 155mm.
– Operating temperature from -60°C to +105°C.
Application Scenarios:
– Used for supporting cables and conductors in industrial areas.
– Applicable for both LV and HV cables.
Pros:
– High strength aluminium alloy construction.
– Available in epoxy coated versions for harsh environments.
Cons:
– Limited to specific cable diameter ranges.
– Potentially higher cost compared to non-aluminium alternatives.
Product Details: BICON Cable Cleats are designed for supporting and fixing all cable types, available in various materials including heavy-duty variants. They include options like Two-bolt Cable Cleats, Hook Cleats, Telcleat, and Claw Cleats.
Technical Parameters:
– Thermoset epoxy coating available for environmental protection
– Patented Multicleat/Multistrap system for Trefoil installations
Application Scenarios:
– Major electrical engineering projects such as the Channel Tunnel and London Heat…
– Installation of fire resistant and Low Smoke Zero Halogen cables
Pros:
– Comprehensive range of cable cleats for various applications
– Tested with Prysmian Group cable products for optimal performance
Cons:
– Technical data subject to change without notice
– Specific fixing solutions may be required for certain cable types
What are cable cleats and why are they important?
Cable cleats are devices used to secure and support electrical cables in various installations. They are important because they help prevent cable movement, reduce the risk of damage, and ensure safety by maintaining proper spacing and organization of cables.
How do I choose the right cable cleat manufacturer?
When choosing a cable cleat manufacturer, consider their reputation, product quality, compliance with industry standards, and customer service. Look for manufacturers with experience in your specific application and positive reviews from other customers.
What materials are commonly used in cable cleats?
Cable cleats are typically made from materials like aluminum, stainless steel, or high-strength plastic. The choice of material depends on the application environment, such as exposure to moisture, chemicals, or extreme temperatures.
Can cable cleats be used in outdoor applications?
Yes, many cable cleats are designed for outdoor use. When selecting cleats for outdoor applications, ensure they are made from weather-resistant materials and are suitable for the specific environmental conditions they will face.
What is the typical lead time for ordering cable cleats?
Lead times for ordering cable cleats can vary based on the manufacturer and the complexity of your order. Generally, you can expect a lead time of a few days to several weeks, so it’s best to check with the manufacturer for specific timelines.
If you want to learn more, please visit our website Industrial Mining Supply.